VAPING METH TIPS
When methamphetamine is exposed to temperatures much higher than its vaporization point, its molecules begin to degrade through pyrolysis (chemical breakdown due to heat). This breakdown can form various toxic compounds. The black residue often seen in the pipe is likely a mix of burned meth and these toxic chemicals, which can cause damage to the lungs and other tissues when inhaled.
While no method of using meth is completely safe, here are a few approaches that might help reduce the risk of inhaling harmful by products:
Lower, more controlled heating; the key here is to aim for steady, even heating of the pipe to avoid burning meth. Using a butane torch with a soft flame (instead of direct high heat) can help control the temperature more effectively. The goal is to heat just enough to vaporize the meth, not scorch it. Also it helps to remember – inside of the pipe is getting warmer with a slight delay, which means that when you take the heat away the pipe will be still getting hotter for a second or two.
Spreading meth thinly: Spreading meth out more thinly across the pipe surface can help expose more of the substance to lower heat, allowing for better vaporization. However, as you might have already noticed, it doesn’t always work well. One way to improve this is to tilt and rotate the pipe gently during heating, ensuring that the meth doesn’t pool and overheat in one spot.
Cooling the vapor: Consider using longer glass pipes or rigs that allow the vapor to cool slightly before inhalation. Hot vapor can cause more irritation to the lungs and can potentially carry more impurities. Longer pipes give the vapor time to condense slightly, allowing larger toxic particles to settle inside the pipe rather than being inhaled.
USE WATER BONG: WATER ACTS AS A FILTER AND COOLS DOWN THE SMOKE THEREFORE MAKING IT SMOOTHER. ALSO, YOUR TEETH WILL THANK YOU FOR THIS!
Cooling DOWN the PIPE: ALWAYS HAVE A PIECE OF WET PAPER TOWEL/RAG WHILE SMOKING TO COOL DOWN THE PIPE MUCH MORE RAPIDLY. THIS HELPS TO AVOID BURNING AND WASTE OF THE PRODUCT. BE CAREFUL WITH THIS METHOD THOUGH, BECAUSE IT DOES NOT TAKE MUCH TO CRACK THE PIPE.
Frequent pipe cleaning: Regularly clean your glass pipe to remove any residue buildup. Not only can residue from previous sessions affect the flavor, but it also can contribute to the release of harmful chemicals when reheated. Use a proper glass-cleaning method, such as isopropyl alcohol and salt, to dissolve residues and prevent re-inhalation of burned materials. Eventually run hot water thoroughly under the faucet and after pipe is already dry you can torch the shit out of it – just make sure you are not inhaling what you’re burning! Best way to do it would be under an exhaust fan for example in the kitchen or bathroom.
Inhalation techniques: Taking slower, smaller hits can also reduce the amount of vapor being inhaled in one go, lowering the irritation and potential exposure to harmful byproducts.
Make a methalated alcohol burner using a piece of steel tube about 4-5 inches long, a glass or aliminium small bottle (A mini bar vodka bottle) cut a piece of string from your clean string mop and feed into the tube as the wick. poke a hole for the tube in the lid of the minibar bottle and feed the tube and the wick through the lid, fill the bottle about half way with the methalated alcohol and screw lid on…
lite the wick and the alcohol burns nice and slow and clean doesnt leave carbon all over the bowl like a normal bic lighter… burns at a very low temp and very evenly
Methalated SPirits is just pure alcohol with the mathalted added to stop people drinking it (although it doesn’t stop some of the first nations people over here in AU or some chronic alocoholics from drinking it with milk, which kills them in a bout 3-5 weeks generally)
If a person was so inclined to build their own electric or battery operated pipe or rig, what would be the ideal temperature for vaporizing the product?
melting point of methamphetamine is about 340 Fahrenheit (170 Celsius)
Are there any foolproof ways to use a vape cartridge or refillable vape to smoke it? Or does anyone else have any ways to use it in that fashion? I’ve tried a few diff ones but I can come up with a foolproof contraption that heats it and hitting properly without the coal being ruined , shitty taste , and the list goes on
I was just thinking of attempting this.. waiting on next check to clear lmao but I’m going to do a mixture of water and crystal…(.5g/1mL H20) and then match the amount of propylene glycol and see if that works
I have a fairly mre vape and am planning to try meth without the cut and s non nicotine glycol. Thank you for your mix suggestions. The device I have does have a selection of temperature variations do as Cookie 13 mentioned lowest temp, short hits and taking it slow. O’ll let you know how my meth/vape experimentations pan out, zi appreciate the advice of other meth/vape afficinados Thanks all for your time and patience,
Check out a device called ORBIT.
helps a lot
Where can I purchase a “Mr. Orbit” should my meth/vape experiments yield less than optimal results?
I’ve heard the yocan orbit is prime for this it’s an evenly heated quartz bucket with quartz beads that spin on the inside to evenly burn whatever you do choose to smoke out of it. You can get them for only like 30 bucks too
I use the Dr Dabbler Evo Boost , 6 controlled heating cycles, between 450F to 700F appr
Wow, didn’t think there was that much information on the ol chicken bone smoke….I am…once again blwob away by the cooks knowledge. Definitely gonna give the temp control a shot! And the orbit!